|
|
|
|
|
|
|
|
Features:
- Load Cell driven system provides precise control of test force
application
- Direct digital reading
- Engineered to obtain highly sensitive and accurate readings
- Perfect for laboratories, workshops, tool rooms, inspection labs,
etc.
- Measuring Range: 8-650HBW
Specifications:
- Innovative closed-loop technology. The Brinell hardness tester incorporates
the latest load cell technology. The test load is applied via a closed-loop
control unit with a load cell, a DC motor and an electronic measurement and
control unit. The result is highly accurate Brinell hardness measurements
at all test loads up to 0.5%. The common load overshoot or undershoot as
known from traditional dead weight, or open-loop, systems is eliminated.
The absence of mechanical weights not only eliminates friction problems but
also makes the equipment less sensitive to misalignments caused by vibrations.
- The whole weight of the tester is 50% less than the traditional dead weights
type tester.
- Test load selection by keyboard and LCD screen.
- Fully automatic test cycles. The Brinell hardness Tester features a fully
automatic test cycle, load application, holding, unloading, is performed
fully automatically. This greatly improves reproducibility of test results
since operator influence is eliminated.
- Selectable dwell times by screen. The indenter, load, and other test information
are shown clearly on the large LCD screen.
- The directions for 0.102F/D2 ratios selecting according to the materials
and hardness range can be showing on the screen.
- Equipped with a 20X optical microscope to measure the diameter of Brinell
indention.
- Brinell Hardness Calculator (BHC) make the hardness value calculation easier
and convenient.
|
|
|
Brinell Hardness Tester screen samples |
Technical
data:
Loads: 3000kgf
(29400N), 1500Kgf (14700N), 1000Kgf (9800N),
750Kgf(7355N),500Kgf (4900N),
250Kgf
(2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf
(980N), 62.5Kgf(612.9N) |
Load dwell
duration: 2s~99s, can be set and
stored |
Tungsten Carbide
Ball indenter: 10mm, 5mm, 2.5mm |
Measuring
range: 8-650HBW |
Magnification
of the microscope: 20X |
Resolution
capability of the microscope: 0.005mm |
Accuracy of
Brinell Hardness Value: |
Hardness Range(HBW) |
Error (%) |
Repeatability(%) |
≤ 125 |
± 3.0 |
≤ 3.0 |
125 < HBW ≤ 225 |
± 2.5 |
≤ 2.5 |
> 225 |
± 2.0 |
≤ 2.0 |
Max measurable
height: 230 mm |
Max measurable
depth: 140 mm |
Dimensions:
530mm×260mm×750mm |
Power supply:
220/110 V, 50/60 Hz, 4A |
Weight: 110kg |
Standard blocks:
125-350HBW10/3000, 125-350HBW10/1000 |
|
|
|
HOME | RESOURCES | SERVICES | TRADE SHOWS | CONTACTS | LINKS
Copyright © Rockwell-HardnessTesters.com |
|