|
|
Based on the same design as our analog Rockwell hardness testers, the 900-345 Phase II superficial Rockwell hardness tester maintains a “state-of-the-art” level delivering unmatched repeatability in all superficial Rockwell hardness scales. A flawless performer, these hardness testers conform to ASTM E-18 standards, tenaciously providing highly sensitive and accurate readings. This hardness tester is perfectly suited for Laboratories, tool rooms, workshops and inspection labs. Lifetime Free! Tech support is included.
Features:
- Direct analog dial reading
- Engineered to obtain highly sensitive and accurate readings
- Conforms to ASTM E-18
- Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
- For testing thin, soft material in the Superficial Rockwell scales (900-345)
Specifications:
Minor Load |
10 Kgf |
Major Load |
15 Kgf, 30 Kgf, 45 Kgf |
Test Force Application |
Dead Weight |
Test Force Control |
Manual |
Results Display |
Analog Dial Gage |
Vertical Capacity |
6.7 in. |
Throat Depth |
6.6 in. |
Height |
28 in. |
Width |
8.9 in. |
Depth |
19.6 in. |
Shipping Weight |
190 lbs |
Accessories:
- N-scale Diamond Indentor
- 1/16" Steel Ball Indentor
- 3- HRN Test Blocks
- 3-HRT Test Blocks
- Test Table 5.87" (150mm)
- Flat Anvil 2.5" (63mm)
- Spot Anvil .38" (10mm)
- Std. Vee Anvil
- Accessory Case
- Dust Cover
Scale Symbol |
Indenter Type
Ball dimensions indicate diameter |
Preliminary Force
N (kgf) |
Total Force
N (kgf) |
Typical Application |
15N |
Spheroconical Diamond |
29.42 (3) |
147.1 (15) |
Similar to A,C and D scales, but for thinner gage material or case depth |
30N |
Spheroconical Diamond |
29.42 (3) |
294.2(30) |
45N |
Spheroconical Diamond |
29.42 (3) |
441.3(45) |
15T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
147.1 (15) |
Similar to B,F and G scales but for thinner gage materials |
30T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
294.2(30) |
45T |
Ball - 1/16" (1.588mm) |
29.42 (3) |
441.3(45) |
15W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
147.1 (15) |
Very soft material |
30W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
294.2(30) |
45W |
Ball - 1/8" (3.175mm) |
29.42 (3) |
441.3(45) |
15X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
147.1 (15) |
30X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
294.2(30) |
45X |
Ball - 1/4" (6.350mm) |
29.42 (3) |
441.3(45) |
15Y |
Ball - 1/2"(12.70mm) |
29.42 (3) |
147.1 (15) |
30Y |
Ball - 1/2"(12.70mm) |
29.42 (3) |
294.2(30) |
45Y |
Ball - 1/2"(12.70mm) |
29.42 (3) |
441.3(45) |
|
|
|